Aluminum Spiral Heat Exchanger Finned Oil Cooler Tubing
advantages of Using aluminum spiral heat exchanger finned oil Cooler tubing Aluminum spiral heat exchanger finned oil cooler tubing is a popular choice for many industries due to its numerous advantages. This type of tubing is designed to efficiently transfer heat from one fluid to another, making it an essential component in various heating and…
advantages of Using aluminum spiral heat exchanger finned oil Cooler tubing
Aluminum spiral heat exchanger finned oil cooler tubing is a popular choice for many industries due to its numerous advantages. This type of tubing is designed to efficiently transfer heat from one fluid to another, making it an essential component in various heating and cooling systems. In this article, we will explore the advantages of using aluminum spiral heat exchanger finned oil cooler tubing. One of the main advantages of aluminum spiral heat exchanger finned oil cooler tubing is its high thermal conductivity. Aluminum is known for its excellent heat transfer properties, allowing for efficient heat exchange between fluids. This means that heat can be quickly and effectively transferred from the oil to the surrounding air or water, helping to regulate temperatures in a system.
Additionally, aluminum spiral heat exchanger finned oil cooler tubing is lightweight and easy to install. This makes it a cost-effective option for many applications, as it requires less labor and Materials to set up. The lightweight nature of aluminum tubing also makes it easier to transport and handle, reducing the risk of damage during installation.
Another advantage of aluminum spiral heat exchanger finned oil cooler tubing is its durability. Aluminum is a corrosion–resistant material, making it ideal for use in environments where exposure to moisture or chemicals is a concern. This ensures that the tubing will have a long service life and require minimal Maintenance over time.
| Chemical composition, mass Fraction (%) | ||||||||||||||
| grade | C | Mn | Mo | Cr | Ni | Cu | P | S | Si | |||||
| Type | min | max | min | max | min | max | min | max | max | max | max | max | max | |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |
| H40 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
| J55 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
| k55 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
| n80 | 1 | — | — | — | — | — | — | — | — | — | — | 0.03 | 0.03 | — |
| N80 | Q | — | — | — | — | — | — | — | — | — | — | 0.03 | 0.03 | — |
| R95 | — | — | 0.45 c | — | 1.9 | — | — | — | — | — | — | 0.03 | 0.03 | 0.45 |
| l80 | 1 | — | 0.43 a | — | 1.9 | — | — | — | — | 0.25 | 0.35 | 0.03 | 0.03 | 0.45 |
| L80 | 9Cr | — | 0.15 | 0.3 | 0.6 | 0.9 | 1.1 | 8 | 10 | 0.5 | 0.25 | 0.02 | 0.03 | 1 |
| L80 | 13Cr | 0.15 | 0.22 | 0.25 | 1 | — | — | 12 | 14 | 0.5 | 0.25 | 0.02 | 0.03 | 1 |
| c90 | 1 | — | 0.35 | — | 1.2 | 0.25 b | 0.85 | — | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
| T95 | 1 | — | 0.35 | — | 1.2 | 0.25 b | 0.85 | 0.4 | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
| C110 | — | — | 0.35 | — | 1.2 | 0.25 | 1 | 0.4 | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
| p110 | e | — | — | — | — | — | — | — | — | — | — | 0.030 e | 0.030 e | — |
| Q125 | 1 | — | 0.35 | 1.35 | — | 0.85 | — | 1.5 | 0.99 | — | 0.02 | 0.01 | — | |
| NOTE elements shown shall be reported in product analysis. | ||||||||||||||
| a The carbon content for L80 may be increased up to 0.50 % maximum if the product is oil-quenched or polymer-quenched. | ||||||||||||||
| b The molybdenum content for Grade C90 Type 1 has no minimum tolerance if the Wall thickness is less than 17.78 mm. | ||||||||||||||
| c The carbon content for R95 may be increased up to 0.55 % maximum if the product is oil-quenched. | ||||||||||||||
| d The molybdenum content for T95 Type 1 may be decreased to 0.15 % minimum if the wall thickness is less than 17.78 mm. | ||||||||||||||
| e For EW Grade P110, the phosphorus content shall be 0.020 % maximum and the sulfur content 0.010 % maximum. | ||||||||||||||
