API-5CT J55 Coupling, 9 5/8 Inch, LTC End
overview of API–5ct J55 coupling api-5ct J55 Coupling, 9 5/8 inch, LTC End The API-5CT J55 Coupling is a vital component in the oil and gas industry. It is specifically designed to connect two Pipes together, ensuring a secure and leak-free connection. This coupling is made from high-quality Materials and is manufactured according to the…
overview of API–5ct J55 coupling
API-5CT J55 Coupling, 9 5/8 inch, LTC End
The API-5CT J55 Coupling is a vital component in the oil and gas industry. It is specifically designed to connect two Pipes together, ensuring a secure and leak-free connection. This coupling is made from high-quality Materials and is manufactured according to the american petroleum institute (API) standards.
Casing Pipe china high-grade Supplier,casing pipe China good Manufacturer,casing pipe wholesale–Price High-Quality best China,One of the key features of the API-5CT J55 Coupling is its size. It has a diameter of 9 5/8 inches, which makes it suitable for a wide range of applications. This size is commonly used in oil and gas drilling operations, where large volumes of oil and gas need to be extracted from the ground.
The LTC end of the API-5CT J55 Coupling is another important aspect to consider. LTC stands for Long Thread Coupling, and it is a type of connection that provides a tight Seal and prevents any Leakage. This type of coupling is commonly used in high-pressure and high-temperature applications, where a secure connection is crucial.
| Tensile and hardness requirements | |||||||||
| Grade | Yield strength MPa | Tensile Strength | Hardness a,c | specified Wall thickness | Allowable Hardness Variation b | ||||
| Type | Total Elongation Under Load | min MPa | max | ||||||
| min | max | HRC | HBW | mm | HRC | ||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| H40 | — | 0.5 | 276 | 552 | 414 | — | — | — | — |
| J55 | — | 0.5 | 379 | 552 | 517 | — | — | — | — |
| k55 | — | 0.5 | 379 | 552 | 655 | — | — | — | — |
| n80 | 1 | 0.5 | 552 | 758 | 689 | — | — | — | — |
| N80 | Q | 0.5 | 552 | 758 | 689 | — | — | — | — |
| R95 | — | 0.5 | 655 | 758 | 724 | — | — | — | — |
| l80 L80 | 1 | 0.5 | 552 | 655 | 655 | 23 | 241 | — | — |
| L80 | 9Cr 13Cr | 0.5 | 552 | 655 | 655 | 23 | 241 | — | — |
| 0.5 | 552 | 655 | 655 | 23 | 241 | — | — | ||
| c90 | 1 | 0.5 | 621 | 724 | 689 | 25.4 | 255 | £12.70 | 3 |
| 12.71 to 19.04 | 4 | ||||||||
| 19.05 to 25.39 | 5 | ||||||||
| ³ 25.40 | 6 | ||||||||
| T95 | 1 | 0.5 | 655 | 758 | 724 | 25.4 | 255 | £12.70 | 3 |
| 12.71 to 19.04 | 4 | ||||||||
| 19.05 to 25.39 | 5 | ||||||||
| ³ 25.40 | 6 | ||||||||
| C110 | — | 0.7 | 758 | 828 | 793 | 30 | 286 | £12.70 | 3 |
| 12.71 to 19.04 | 4 | ||||||||
| 19.05 to 25.39 | 5 | ||||||||
| ³ 25.40 | 6 | ||||||||
| p110 | — | 0.6 | 758 | 965 | 862 | — | — | — | — |
| Q125 | 1 | 0.65 | 862 | 1034 | 931 | b | — | £12.70 | 3 |
| 12.71 to 19.04 19.05 | 4 | ||||||||
| 5 | |||||||||
| a In case of dispute, laboratory Rockwell C hardness testing shall be used as the referee method. | |||||||||
| b No hardness limits are specified, but the maximum variation is restricted as a manufacturing control in accordance with 7.8 and 7.9. | |||||||||
| c For through-wall hardness tests of grades L80 (all types), C90, T95 and C110, the requirements stated in HRC scale are for maximum mean hardness number. | |||||||||
The API-5CT J55 Coupling is made from J55 grade steel, which is known for its excellent mechanical properties. This steel grade has a high tensile strength and good resistance to corrosion, making it suitable for use in harsh environments. It is also easy to weld and has good formability, allowing for easy installation and Maintenance.
In addition to its size and material, the API-5CT J55 Coupling also meets the stringent requirements set by the API. This ensures that the coupling is manufactured to the highest standards and will perform reliably in the field. The API sets guidelines for the design, manufacturing, and testing of oilfield equipment, including couplings, to ensure the safety and efficiency of operations.
| Labels a | Calculated mass c | ||||||||||
| Nominal Linear Mass T& C b,c | Wall Thick- ness | em, Mass Gain or Loss Due to End Finishing d | |||||||||
| Outside Diameter | inside Diameter | Drift Diameter | Plain- end | kg | |||||||
| Round Thread | Buttress Thread | ||||||||||
| wpe | |||||||||||
| D | kg/m | t | D | mm | kg/m | Short | Long | RC | SCC | ||
| mm | mm | mm | |||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| 13 3/8 | 48 | 339.72 | 71.43 | 8.38 | 322.96 | 318.99 | 68.48 | 15.04 | — | — 17.91 | — |
| 13 3/8 | 54.5 | 339.72 | 81.1 | 9.65 | 320.42 | 316.45 | 78.55 | 13.88 | — | 16.44 | — |
| 13 3/8 | 61 | 339.72 | 90.78 | 10.92 | 317.88 | 313.91 | 88.55 | 12.74 | — | 14.97 | — |
| 13 3/8 | 68 | 339.72 | 101.19 | 12.19 | 315.34 | 311.37 | 98.46 | 11.61 | — | 14.97 | — |
| 13 3/8 | 68 | 339.72 | 101.19 | 12.19 | 315.34 | 311.37 | 98.46 | 11.67 f | — | 14.33 | — |
| 13 3/8 | 72 | 339.72 | 107.15 | 13.06 | 313.6 | 311.15 e | 105.21 | 10.98 | — | 13.98 | — |
| 13 3/8 | 72 | 339.72 | 107.15 | 13.06 | 313.6 | 311.15 e 309.63 309.63 | 105.21 | 10.91 f | — | 14.33 | — |
| 13 3/8 | 72 | 339.72 | 107.15 | 13.06 | 313.6 | 105.21 | 10.98 | — | 13.98 | — | |
| 13 3/8 | 72 | 339.72 | 107.15 | 13.06 | 313.6 | 105.21 | 10.91 e | — | — | ||
| 16 | 65 | 406.4 | 96.73 | 9.53 | 387.4 | 382.57 | 96.73 | 18.59 | — | — 20.13 | — |
| 16 | 75 | 406.4 | 111.61 | 11.13 | 384.1 | 379.37 | 108.49 | 16.66 | — | 18.11 | — |
| 16 | 84 | 406.4 | 125.01 | 12.57 | 381.3 | 376.48 | 122.09 | 14.92 | — | — | — |
| 16 | 109 | 406.4 | 162.21 | 16.66 | 373.1 | 368.3 | 160.13 | — | — | — | |
| 18 5/8 | 87.5 | 473.08 | 130.21 | 11.05 | 450.98 | 446.22 | 125.91 | 33.6 | — | 39.25 | — |
| 20 | 94 | 508 | 139.89 | 11.13 | 485.7 | 480.97 | 136.38 | 20.5 | 27.11 | 24.78 | — |
| 20 | 94 | 508 | 139.89 | 11.13 | 485.7 | 480.97 | 136.38 | 20.61 | 27.26 g 24.27 17.84 | 24.78 | — |
| 20 | 106.5 | 508 | 158.49 | 12.7 | 482.6 | 477.82 | 155.13 | 18.22 | 22 | — | |
| 20 | 133 | 508 | 197.93 | 16.13 | 475.7 | 470.97 | 195.66 | 13.03 | 16.02 | — | |
| NOTE See also Figures D.1, D.2, and D.3. | |||||||||||
| a Labels are for information and assistance in ordering. | |||||||||||
| b Nominal linear masses, threaded and coupled (Column 4) are shown for information only. | |||||||||||
| c The densities of martensitic chromium steels (L80 Types 9Cr and 13Cr) are less than those of carbon steels; The masses shown are therefore not accurate for martensitic chromium steels; A mass correction factor of 0.989 shall be used. | |||||||||||
| d Mass gain or loss due to end finishing; See 8.5. | |||||||||||
| e Drift diameter for most common bit size; This drift diameter shall be specified in the purchase agreement and marked on the pipe; See 8.10 for drift requirements. | |||||||||||
| f Based on 758 mPa minimum yield strength or greater. | |||||||||||
| g Based on 379 mPa minimum yield strength. | |||||||||||
The API-5CT J55 Coupling is commonly used in various applications in the oil and gas industry. It is used in drilling operations to connect the drill pipe and casing, allowing for the extraction of oil and gas from the ground. It is also used in well completion and production operations, where it connects the production tubing and casing, ensuring a secure and leak-free flow of oil and gas.
In conclusion, the API-5CT J55 Coupling is a critical component in the oil and gas industry. Its size, LTC end, and J55 grade steel make it suitable for a wide range of applications. It meets the stringent requirements set by the API, ensuring its reliability and performance in the field. Whether it is used in drilling, well completion, or production operations, the API-5CT J55 Coupling provides a secure and leak-free connection, contributing to the efficiency and safety of oil and gas operations.
