Casing and Tubing Supplier, J55, K55, N80, L80, P110
The Benefits of Working with a J55, k55, n80, l80, p110 Casing and tubing Supplier Working with a J55, K55, N80, L80, P110 casing and tubing Supplier has many benefits. Firstly, they provide high-quality products that are designed to last. The Materials used are strong and durable, ensuring that your casing and tubing will stand…
The Benefits of Working with a J55, k55, n80, l80, p110 Casing and tubing Supplier
Working with a J55, K55, N80, L80, P110 casing and tubing Supplier has many benefits. Firstly, they provide high-quality products that are designed to last. The Materials used are strong and durable, ensuring that your casing and tubing will stand up to the toughest conditions. Secondly, they offer competitive Prices, allowing you to get the best value for your money. Thirdly, they have a wide selection of sizes and styles, so you can find the perfect fit for your project. Finally, they provide excellent customer service, so you can be sure that any questions or concerns you have will be addressed quickly and efficiently. With all these benefits, it’s no wonder why so many people choose to work with a J55, K55, N80, L80, P110 casing and tubing supplier.
understanding the different types of Casing and tubing: J55, K55, N80, L80, P110
Casing and tubing are essential components of oil and gas wells. They are used to protect the wellbore and to facilitate the flow of oil and gas. There are several types of casing and tubing, each with its own characteristics and uses.
J55 is the most common type of casing and tubing used in oil and gas wells. It is a low-cost material that is easy to work with and has good corrosion resistance. It is often used in shallow wells and in wells with low pressure.
K55 is similar to J55 but has higher yield strength and better corrosion resistance. It is often used in deeper wells and in wells with higher pressure.
| Chemical composition, mass Fraction (%) | ||||||||||||||
| grade | C | Mn | Mo | Cr | Ni | Cu | P | S | Si | |||||
| Type | min | max | min | max | min | max | min | max | max | max | max | max | max | |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |
| H40 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
| J55 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
| K55 | — | — | — | — | — | — | — | — | — | — | — | — | 0.03 | — |
| N80 | 1 | — | — | — | — | — | — | — | — | — | — | 0.03 | 0.03 | — |
| N80 | Q | — | — | — | — | — | — | — | — | — | — | 0.03 | 0.03 | — |
| R95 | — | — | 0.45 c | — | 1.9 | — | — | — | — | — | — | 0.03 | 0.03 | 0.45 |
| L80 | 1 | — | 0.43 a | — | 1.9 | — | — | — | — | 0.25 | 0.35 | 0.03 | 0.03 | 0.45 |
| L80 | 9Cr | — | 0.15 | 0.3 | 0.6 | 0.9 | 1.1 | 8 | 10 | 0.5 | 0.25 | 0.02 | 0.03 | 1 |
| L80 | 13Cr | 0.15 | 0.22 | 0.25 | 1 | — | — | 12 | 14 | 0.5 | 0.25 | 0.02 | 0.03 | 1 |
| c90 | 1 | — | 0.35 | — | 1.2 | 0.25 b | 0.85 | — | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
| T95 | 1 | — | 0.35 | — | 1.2 | 0.25 b | 0.85 | 0.4 | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
| C110 | — | — | 0.35 | — | 1.2 | 0.25 | 1 | 0.4 | 1.5 | 0.99 | — | 0.02 | 0.03 | — |
| P110 | e | — | — | — | — | — | — | — | — | — | — | 0.030 e | 0.030 e | — |
| Q125 | 1 | — | 0.35 | 1.35 | — | 0.85 | — | 1.5 | 0.99 | — | 0.02 | 0.01 | — | |
| NOTE elements shown shall be reported in product analysis. | ||||||||||||||
| a The carbon content for L80 may be increased up to 0.50 % maximum if the product is oil-quenched or polymer-quenched. | ||||||||||||||
| b The molybdenum content for Grade C90 Type 1 has no minimum tolerance if the Wall thickness is less than 17.78 mm. | ||||||||||||||
| c The carbon content for R95 may be increased up to 0.55 % maximum if the product is oil-quenched. | ||||||||||||||
| d The molybdenum content for T95 Type 1 may be decreased to 0.15 % minimum if the wall thickness is less than 17.78 mm. | ||||||||||||||
| e For EW Grade P110, the phosphorus content shall be 0.020 % maximum and the sulfur content 0.010 % maximum. | ||||||||||||||
N80 is a higher grade of casing and tubing than J55 and K55. It has higher yield strength and better corrosion resistance. It is often used in deeper wells and in wells with higher pressure.
L80 is a higher grade of casing and tubing than N80. It has higher yield strength and better corrosion resistance. It is often used in deeper wells and in wells with higher pressure.
Oil Tube chinese high-grade wholesaler,casing Pipe china good Company,
P110 is the highest grade of casing and tubing. It has the highest yield strength and the best corrosion resistance. It is often used in the deepest wells and in wells with the highest pressure.
