introduction to liquid Flare line eue tubing 3.5 9.3LB/FT J55 range-3

Liquid flare line EUE tubing is an essential component in the oil and gas industry. It plays a crucial role in the transportation of liquids from the wellbore to the surface. In this article, we will introduce you to the liquid flare line EUE tubing with a specific focus on the 3.5″ 9.3LB/FT J55 RANGE-3 tubing. Liquid flare line EUE tubing is designed to withstand high pressure and extreme conditions. It is made from high-quality Materials to ensure durability and reliability. The 3.5″ diameter of the tubing allows for efficient flow of liquids, while the 9.3LB/FT weight provides the necessary strength to handle the pressure.

Chemical composition, mass Fraction (%)
grade		C		Mn		Mo		Cr		Ni	Cu	P	S	Si
	Type	min	max	min	max	min	max	min	max	max	max	max	max	max
1	2	3	4	5	6	7	8	9	10	11	12	13	14	15
H40	—	—	—	—	—	—	—	—	—	—	—	—	0.03	—
J55	—	—	—	—	—	—	—	—	—	—	—	—	0.03	—
k55	—	—	—	—	—	—	—	—	—	—	—	—	0.03	—
n80	1	—	—	—	—	—	—	—	—	—	—	0.03	0.03	—
N80	Q	—	—	—	—	—	—	—	—	—	—	0.03	0.03	—
R95	—	—	0.45 c	—	1.9	—	—	—	—	—	—	0.03	0.03	0.45
l80	1	—	0.43 a	—	1.9	—	—	—	—	0.25	0.35	0.03	0.03	0.45
L80	9Cr	—	0.15	0.3	0.6	0.9	1.1	8	10	0.5	0.25	0.02	0.03	1
L80	13Cr	0.15	0.22	0.25	1	—	—	12	14	0.5	0.25	0.02	0.03	1
c90	1	—	0.35	—	1.2	0.25 b	0.85	—	1.5	0.99	—	0.02	0.03	—
T95	1	—	0.35	—	1.2	0.25 b	0.85	0.4	1.5	0.99	—	0.02	0.03	—
C110	—	—	0.35	—	1.2	0.25	1	0.4	1.5	0.99	—	0.02	0.03	—
p110	e	—	—	—	—	—	—	—	—	—	—	0.030 e	0.030 e	—
Q125	1	—	0.35		1.35	—	0.85	—	1.5	0.99	—	0.02	0.01	—
NOTE elements shown shall be reported in product analysis.
a The carbon content for L80 may be increased up to 0.50 % maximum if the product is oil-quenched or polymer-quenched.
b The molybdenum content for Grade C90 Type 1 has no minimum tolerance if the Wall thickness is less than 17.78 mm.
c The carbon content for R95 may be increased up to 0.55 % maximum if the product is oil-quenched.
d The molybdenum content for T95 Type 1 may be decreased to 0.15 % minimum if the wall thickness is less than 17.78 mm.
e For EW Grade P110, the phosphorus content shall be 0.020 % maximum and the sulfur content 0.010 % maximum.

The J55 grade of the tubing refers to its material composition. J55 is a commonly used grade in the oil and gas industry due to its excellent mechanical properties. It has a high yield strength, which means it can withstand significant stress without deformation. This makes it ideal for use in demanding environments. The RANGE-3 designation indicates the length of the tubing. In this case, the tubing is designed to be used in wells with a depth of up to 45 feet. This length is suitable for most oil and gas operations and ensures efficient liquid transportation from the wellbore to the surface. Glass dropper

One of the key features of liquid flare line EUE tubing is its Threaded connections. The tubing is equipped with external upset ends (EUE) that allow for easy and secure connection to other components. The threads are designed to provide a tight Seal, preventing any Leakage during the transportation process. This ensures the safety and efficiency of the operation. Liquid flare line EUE tubing is also corrosion–resistant. It is coated with a protective layer to prevent rust and corrosion, which can compromise the integrity of the tubing. This coating extends the lifespan of the tubing, reducing the need for frequent replacements and Maintenance. In addition to its primary function of liquid transportation, liquid flare line EUE tubing can also be used for other purposes. It can be utilized in well testing operations, where it is connected to a testing unit to measure the flow rate and pressure of the well. It can also be used in well intervention operations, such as pumping chemicals or cement into the wellbore. In conclusion, liquid flare line EUE tubing is a vital component in the oil and gas industry. The 3.5″ 9.3LB/FT J55 RANGE-3 tubing is specifically designed to handle high pressure