Protection of Oil Casing Tube Steel via Surface Treatment …

Exploring the Benefits of surface treatment for protection of Oil casing Tube steel: A Comprehensive overview Surface treatment is an important process for protecting oil casing tube steel from corrosion and other environmental factors. This comprehensive overview will explore the benefits of surface treatment for oil casing tube steel, including improved corrosion resistance, improved wear…

Exploring the Benefits of surface treatment for protection of Oil casing Tube steel: A Comprehensive overview

Surface treatment is an important process for protecting oil casing tube steel from corrosion and other environmental factors. This comprehensive overview will explore the benefits of surface treatment for oil casing tube steel, including improved corrosion resistance, improved wear resistance, and improved fatigue strength.
casing Pipe china good factory,oil tube wholesaleprice highquality good chinese,casing pipe Chinese high-quality factory,
Corrosion resistance is one of the most important benefits of surface treatment for oil casing tube steel. Surface treatment can provide a protective layer that prevents the steel from coming into contact with corrosive elements, such as water, salt, and other chemicals. This layer can also help to reduce the rate of corrosion, which can extend the life of the steel.

alt-883
Surface treatment can also improve the wear resistance of oil casing tube steel. This is especially important in applications where the steel is exposed to high levels of friction, such as in drilling operations. The protective layer created by surface treatment can reduce the amount of wear and tear on the steel, which can help to extend its life.

Finally, surface treatment can also improve the fatigue strength of oil casing tube steel. This is important in applications where the steel is subjected to repeated cycles of stress, such as in oil and gas pipelines. The protective layer created by surface treatment can help to reduce the amount of stress on the steel, which can help to extend its life.

          Calculated Mass c
    Nominal Linear Mass T& C b,c Wall Thick- ness       em, Mass Gain or Loss Due to End Finishing d
Labels a Outside diameter     Inside Diameter Drift Diameter Plain- end kg
              Round Thread Buttress Thread
            wpe        
  D kg/m t D mm kg/m Short Long RC SCC
  mm   mm mm            
1 2 3 4 5 6 7 8 9 10 11 12
10 3/4 32.75 273.05 48.74 7.09 258.9 254.91 46.5 13.94 — 15.38 — 3.03
10 3/4 40.5 273.05 60.27 8.89 255.3 251.31 57.91 11.91 14.21 1.86
10 3/4 45.5 273.05 67.71 10.16 252.7 250.82 e 248.77 246.23 246.33 65.87 11 14.21 1.86
10 3/4 45.5 273.05 67.71 10.16 252.7 244.48 e 65.87 11 13.05 0.7
10 3/4 51 273.05 75.9 11.43 250.2 244.48 e 243.94 243.94 241.40 241.40 238.86 238.86 234.95 231.80 228.60 73.75 10.11 13.05 0.7
10 3/4 51 273.05 75.9 11.43 250.2   73.75 10.16 f 12.25 –0.09
10 3/4 55.5 273.05 82.59 12.57 247.9   80.75 9.3 12.01 –0.34
10 3/4 55.5 273.05 82.59 12.57 247.9   80.75 9.35 f 12.25 –0.09
10 3/4 55.5 273.05 82.59 12.57 247.9   80.75 9.3 12.01 –0.34
10 3/4 55.5 273.05 82.59 12.57 247.9   80.75 9.35 f 11.07
10 3/4 60.7 273.05 90.33 13.84 245.4   88.47 8.42 10.87
10 3/4 60.7 273.05 90.33 13.84 245.4   88.47 8.47 f 9.98
10 3/4 65.7 273.05 97.77 15.11 242.8   96.12 7.54 9.74
10 3/4 65.7 273.05 97.77 15.11 242.8   96.12 7.60 f
10 3/4 73.2 273.05 108.93 17.07 238.9   107.76
10 3/4 79.2 273.05 117.86 18.64 235.8   116.95
10 3/4 85.3 273.05 126.94 20.24 232.6   126.19    
11 3/4 42 298.45 62.5 8.46 281.5 279.40 e 277.50 275.44 272.39 62.56 13.27
11 3/4 42 298.45 62.5 8.46 281.5 269.88 e 62.56 13.27 — 16.04
11 3/4 47 298.45 69.94 9.52 279.41 269.88 e 67.83 12.42 14.5
11 3/4 54 298.45 80.36 11.05 276.4 269.65 78.32 11.23 13.12
11 3/4 60 298.45 89.29 12.42 273.6 269.65 e 87.61 10.17 13.12
11 3/4 60 298.45 89.29 12.42 273.6 269.88 e 267.36 264.92 87.61 9.77 f 13.12
11 3/4 60 298.45 89.29 12.42 273.6   87.61 10.17 13.12
11 3/4 60 298.45 89.29 12.42 273.6   87.61 9.77 f
11 3/4 65 298.45 96.73 13.56 271.3   95.27
11 3/4 65 298.45 96.73 13.56 271.3   95.27
11 3/4 71 298.45 105.66 14.78 268.9   103.4  

In conclusion, surface treatment can provide a number of benefits for oil casing tube steel, including improved corrosion resistance, improved wear resistance, and improved fatigue strength. This comprehensive overview has explored the benefits of surface treatment for oil casing tube steel, and has highlighted the importance of this process for protecting the steel from corrosion and other environmental factors.

 API 5CT  L80 Casing Tubing Range lengths
  Range 1 Range 2 Range 3
CASING (PE/T and C/SF)      
Total range length, inclusive Permissible variation, max a 4.88 to 7.62 1.83 7.62 to 10.36 10.36 to 14.63 1.83
    1.52  
TUBING AND CASING USED AS TUBING      
(PE/T and C/SF)      
Total range length, inclusive Permissible variation, max a 6.10 to 7.32 b 8.53 to 9.75 c 11.58 to 12.80 d
  0.61 0.61 0.61
INTEGRAL TUBING connectionS (including IJ/PE      
and IJ/SF)      
Total range length, inclusive Permissible variation, max a 6.10 to 7.92 e 8.53 to 10.36 11.58 to 13.72 0.61
  0.61 0.61  
PUP JOINTS Lengths: 0.61; 0.91; 1.22; 1.83; 2.44; 3.05 and 3.66 e
  Tolerance: ±0.076
a Length variation applies to rail car shipment to the point of use and does not apply to order items of less than 18,144 kg of pipe.
b By agreement between purchaser and manufacturer, the maximum length may be increased to 8.57 m.
c By agreement between purchaser and manufacturer, the maximum length may be increased to 10.76 m.
d By agreement between purchaser and manufacturer, the maximum length may be increased to 17.72 m.0.61 m pup joints may be furnished up to 0.91 m long by agreement between purchaser and manufacturer, and lengths other than those listed may be furnished by agreement between purchaser and manufacturer.

Similar Posts